MD-8 Metal Detector
You May Also Be Interested In:
md 8 detector
md 8 metal detector
MD-8 handle Metal Detector that is obtained the national patent (Paten No:ZL.01310300.8) has functions of open, alarm and voice/light auto-switch. It can be used in public security detection of airport, railway station, dock, prison, custom and frontier defense; quality detection of medicine, food and other commodities; examination of noble metal and detection other important fields, e. g. : gymkhana. The machine has past the check of product quality in Shanghai supervision and inspection chief station of public security system, Report number: Shanghai public security inspection 033167
~Use and modulate simply; high sensitivity; alarming with voice and light.
~After opening and waiting for 2 seconds, you can operate it.
~Low consumption, keep working over 40 hours
~If 6V of battery (9V should be used) is used, detection distance doesnt shorten. When the battery lacks, it will keep alarming.
3. Dtection Distance
~Detecting pin: 10-30mm
~Detecting 64-type gun: 120mm
~Detecting 6 inch dagger: 130mm
~Detecting steel ball (dia 20mm) : 90mm. (If Max sensitivity is set, it can reach 120mm)
~Push the power button up, the opening-voice can be heard. It begins to work. You can detect the subject with the detector, when metal is detected, alarm will send out. When you stop detecting, the alarm stops as well and the green indicator lights.
~Push the power button down, the closing-voice can be heard and the green indicator darkens.
~When we maxmize the sensitivity, the opening-voice will keep 3-4seconds. After stopping, you can operate.
5. Sensitivity adjustment:
~If the detection distance cannot reach above standard or its sensitivity is exorbitant, (alarming when detecting human body without metal) you need adjust the sensitivity. You can push the battery cover to turn it up.
~After opening the device, you can adjust the potential screw on the circuit board with screwdriver. Turn it deasil for increasing the sensitivity. Turn it wider shins for decreasing the sensitivity. After finishing, cover the battery cover.
6. Replacing Battery:
~Opening the battery cover, insert new batteries (9V) , then cover it again.
~When the sensitivity is set too high, the device will keep alarming, Reduce its sensitivity for restoring.
~After using the detector, pull the power, Take the batteries out when the detector will not be used for a long time.
~The detector alarms are as scanning metal and it stops alarming as jibbing to metal.
~If the detector keeps alarming and the green indicator darkens, you should replace the batteries.
8. Guarantee to keep six months on evidence of the invoice and prevention mark.
Hits: 111 Record into time: 2004-11-4 [Print] [Back]