You May Also Be Interested In:
This Series Metallurgical Microscope adapt to observing, judging and analyzing the face structure of opaque. It is mainly applied in testing for semiconductor process, materials and mineral researching, precision engineering etc. It is the necessary tool used in factories, schools and scientific institutions.
As the microscope is a precision instrument, always operate it with care, avoiding physical shake during the operation.
Do not let the microscope emerge in the sun directly, either not in the high temperature, damp, dusty or acute shake place. Make sure the worktable is horizontal.
When moving the microscope, you should use both hands to hold its stand, and lay it down carefully.
The lamp will be very hot when it is working. Make sure there is enough room for the heat dissipating.
Make sure the main switch is in 0 (off) (See left figure) before replacing the bulb or fuse and wait until the lamp cools down.
It can adapt wide voltage from 90 to 240V. There is no need for transformer. Make sure the voltage is in this range.
Use the special wire supplied by our company.