Mesh Cable Tray
You May Also Be Interested In:
mesh cable tray
wire mesh cable tray
Introduction of Wire Mesh Cable Tray Systems:
Wire Meshl Cable Tray is produced from high mechanical strength steel wires of up to 6mm. These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits.
Features and Benefits of Wire Mesh Cable Trays:
1. Electroplated Zinc Finish
2. Fast Easy Installation
3. Mesh Design Allows Cable Exit or Entry at any point
4. Clear Cable Identification
5. Supplied in 3 Metre Lengths
6. Significant Cost Savings Compared to Standard Tray Products
7. Simple Creation of Fittings on Site
8. Wide Range of Sizes
9. Heights Shown are Internal Dimensions
Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP)
Mode: Top curved / Top Straight
Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG) , Powder-coated, Pickled & Passivated.
1) . MATERIAL
The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed.
2) . SURFACE FINISH:
A) . Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free.
B) . Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays.
C) . Powder-coated cable trays should be carried out in alkali and salt corrosion free site.
Material Type Stainless Steel - 1.4404 - 316 Stainless Steel - 1.4301 - 304
Wire Thickness 4mm for tray widths 75 - 200mm 5mm for tray widths 300 - 400mm
Tray Length 3.0 Metres
Material Finish Matt
Wall Height 60mm (nominal)