Sell Miner'S Cap Lamp with Methane Gas Alarm(KSW12P)

Miner'S Cap Lamp with Methane Gas Alarm(KSW12P) You May Also Be Interested In: cap lamp gas alarm methane alarm methane gas methane gas alarm
KSW12P(A) miner's lamp is design by stangard of GB7957-2003 General requirements for safety of cap lamp and MT409-1995 miner's lamp with methane alarm. When the methane density is over standard level, it will flash automatically to alarm the operator.

The lamp consists of four parts: Headpiece, alarm part, upper component and battery piece. This lamp made with double bulbs which all can alarm when the methane density is over standard level. If the main bulb is run off, the second bulb can work as same as the main bulb. The lamp socket is provided inside with cut-out against all contingencies. Ln case of accidental breakage of the bulb, current will be immediately cut off. This lamp has the advantages of good spot lighting and high ilumination. The lamp is charged at headpiece, filled from outside. Lts power is provided by lead-acid battery, bigger capcity. Work time long. The alarm part is set on the headpiece and is easily for maintenance.

Technical specification
Rated voltage: 4V
Capacity: 12Ah
Gas for alarm detection: CH4
Alarm for gas density range: 0~1. 5%
Tolerance: +/- 10%
Responding time: Less than 20seconds
Recovery time: Less than 25seconds
Alarming function: Flashing
Life of gas sensor: 1year
Rated current for bulb: 0. 8A 0. 6A
Luminosity: Over 6000 Lux
Current consumption of bulb: Less than 0. 95A
Current consumption of alarm part: Less than 0. 15
Continuous working time: Over 11hours
Demension: 62. 5x146. 5x219. 5mm
Battery life: 500 cycles
Weight: Less than 2. 5kg
Supply Capacity
300,000 per year
Available Colors
62. 5x146. 5x219. 5mm
Lead Time from Order to Shipment
2 to 3 weeks
Model Number
Minimum Order Quantity
300 units
Power Requirements
Terms of Payment
Terms of Sale
FOB Ningbo
2. 5kg