Sell Molecular sieve

Molecular sieve You May Also Be Interested In: 13x molecular sieve 3a molecular sieve 4a molecular sieve liquid paraffin petroleum hydrocarbon
The molecular sieve is one kind of upgrade desiccant which is made up of aluminosilicate. Because there are inimitable pore size and much higher specific surface areas, there are many excellent merits.
(1) The selective absorption as the different size and shape of molecules, that is to say, it only absorbs those molecules of which the diameter is less than the pore size of molecular sieve.
(2) To those smaller polar molecules and the unsaturated molecules, it has the property of selective absorption. The bigger the polarity is, and the higher the instauration is, the stronger property of the selective absorption is.
(3) It has much stronger property of water sorption too. No matter in the situations of higher temperature, larger space velocity, or lower content of water it is, there is rather higher capacity of water sorption.
Now, there are many types of the molecular sieve, such as 3A, 4A, 5A, 10X, 13X, and Cu2+ etc. , which can be produced by our company and applied to the industries.
The molecular sieve is one kind of upgrade desiccant which is made up of aluminosilicate. Because there are inimitable pore size and much higher specific surface areas, there are many excellent merits.
(1) The selective absorption as the different size and shape of molecules, that is to say, it only absorbs those molecules of which the diameter is less than the pore size of molecular sieve.
(2) To those smaller polar molecules and the unsaturated molecules, it has the property of selective absorption. The bigger the polarity is, and the higher the instauration is, the stronger property of the selective absorption is.
(3) It has much stronger property of water sorption too. No matter in the situations of higher temperature, larger space velocity, or lower content of water it is, there is rather higher capacity of water sorption.
Now, there are many types of the molecular sieve, such as 3A, 4A, 5A, 10X, 13X, and Cu2+ etc. , which can be produced by our company and applied to the industries.
3A Molecular Sieve:

Mainly used for drying out unsaturated hydro carbon, such as the cracked gas-ethylene, propylene, butadiene, acetylene and natural gas. It can be also applied to dry polar liquid such as ethanol, liquefied petroleum gas and solvent. Our product can be used as a drier for large ehtylene device, and the water content may decrease below IPPm (its dew point is below -70:C) .

Reuse: heated dry gas without absorbed composition can be used to below and sweep bed, then the absorbed water will be removed, and the molecular sieve can be reused. The extent of regeneration depends on the time for regeneration and the temperature and humidity of regenerated gas.
Size Bulk Density Static Water Absorption Dynamic Water Absorption Abrasive Loss Crush Strength Ethyle Absorption
Xmm >=g/ml >=% >=% <=% >=N/mm2/pallet >=mg/g
Strip 1.6 0.63 21 20 0.2 35 3
3.2 0.63 21 20 0.2 59 3
Ball 2-3 0.7 21 20 0.2 44 3
3-5 0.65 21 20 0.2 63 3



4A Molecular Sieve

Widely used to dry gas and liquid, such as cracked gas, natural gas, refrigent, liquid gas, naphtha, kerosene, diesel oil and transformer oil, etc. It can be also emplyed to extract, purify argon and desulphurization. This product can absorb H2O, NH3, CO, CO2, SO2, H2S, CH3OH, C2H5OH, C2H4, C2H2, C3H6, etc.

Reuse: heated dry gas without absorbed composition can be applied to below and sweep the bed, and then the molecular sieve is regenerated and can be used again. The extent of regeneration depends on the temperature and humidity of regenerated gas and the time for regeneration.

Size Bulk Density Static Water Absorption Abrasive Loss Crush Strength Methanol Absorption Packaging Water Content
Xmm >=g/ml >=% <=% >=N/pallet >=% <=%
Ball 2-3 0.7 21 0.2 44 15 1.5
3-5 0.68 21 0.2 63 15 1.5



5A Hydrogen-making Molecular Sieve

Mainly used in transformer and absorption device to extract hydrogen from H2N2, CH4. The content of impurity is less than IPPm. This type can be also applied to dry natural gas and liquid or to desulphurization.

Reuse: the method of decompression and separation is used with normal atmospheric temperature that is to absorb water under high pressure, and then decompress to separate out the molecular sieve. This is regenerated and can be resued.

Size Bulk Density Static Water Absorption Abrasive Loss Crush Strength
Xmm >=g/ml >=% <=% >=N/piece
2-3Ball 0.70 23 0.2 44



5A Oxygen-making Molecular Sieve

It is a high efficient absorbent and drier. It absorbs H2O, CO2 in the air, alkynes and hydrocarbon, and separates out O2N2, in device abundant with oxygen.

Reuse: heated gas without absorbed composition can be used to blow and sweep the bed, then the molecular sieve will be separated out and reused. The extant of reuse depends on temperature and humidity of regenerative gas and time for regeneration.

Size Bulk density Static water Absorption Abrasive Loss Crush Strength Packing Water Content
Xmm >=g/ml >=% <=% >=N/piece <=%
Ball 2-3 0.7 21 0.2 44 1.5
3-5 0.68 21 0.2 63 1.5



5A Dewaxed Molecular Sieve

Mainly used to separate out normally-constructed and abnormally constructed alkanet and hydrocarbon. Normally-constructed alkanet and hydrocarbon is the main component of wax, so dewax refers to separate out this kind of component from fraction of petroleum.

Reuse: steam is applied to separate out the molecular sieve, which can be reused long time. After it is reused for some time, this product is regenerated by coking of the mixture of steam and air. The extent of regeneration depends on coking temperature and time for process.

Size Bulk Density Static Water Absorption Abrasive Loss Crush Strength Hexane Absorption Content Benzene Absorption Content
Xmm >=g/ml >=% <=% >=N/mm2/piece p/ns=
0.1%(wt)
mg/g p/ns=
0.8%(wt)
mg/g <=mg/g
Strip 5 0.45 21 0.5 25 >=75 <=130 15
Ball 4-6 0.5 21 0.5 40 >=75 <=130 15



10X Molecular Sieve

Mainly used to absorb the refined liquid paraffin wax, and to separate out sulphide nitride and organic acid, aromatic hydrocarbon and that in fraction of diesel oil and petroleum, and cycloneakanes and cyclic hycrocarbon in fraction of petroleum.

Reuse: steam is used to separate out 10X molecular sieve, and it can be reused long time. This type can be regenerated by coking of mixture of steam and air after being reused for process.

Size Bulk Density Static Water Absorption Abrasive Loss Crush Strength Benzene AbsorptionContent Packing Water Content
Xmm >=g/ml >=% <=% >=N/ mm2/piece >=mg/g <=%
Strip 5 0.42 23 0.4 44 180 1.5
Ball 4-6 0.45 23 0.5 60 180 1.5



CUX Molecular Sieve

Mainly used as a deodorant. It can separate out fulgurated hydrogen, merchantman, thicher and disulfides in gasoline, aviation diesel oil, kerosene, propane butane, butane and liquefied petroleum gas, etc from some liquid and gas.

Reuse: in the process of catalysis, oxidizing and deodorization, CUX molecular sieve can be constantly reused by being supplied with adequate oxygen, and deodorization works continuously. Other ways of regeneration are unnecessary.

Size Bulk Density Static Water Absorption Abrasive Loss Crush Strength Cu Content Benzene Absorption Content
Xmm >=g/ml >=% <=% >=N/ mm2/piece % >=mg/g
Strip 3.210.2 0.6 23 0.2 40 1.5-1.9 180




13X Molecular Sieve

Mainly used to air , to purify material gas in oxygen-making device and to separate out H2O, CO2and C2H2 from the air. In purified air, the content of H2O is almost zero, this type can be also employed to desulphurization or remove H2S in liquid petroleum hydrocarbon and natural gas, and to separate out aromatic hydrocarbon in fraction of kerosene and gasoline.

Reuse: heated dry air without absorbed composition can be applied to blow and sweep the bed, then the molecular sieve is separated out and thus it can be reused. The extent of reuse depends on the temperature and humidity of regenerated gas and time for regeneration.

Size Bulk Density Crush Strength Abrasive CO2 Absorption Content Packing Water Content
Xmm >=g/ml >=NP/ strip N/piece <=% >=% <=%
Strip 1.6 0.6 30 0.2 18 1.5
3.2 0.6 44 0.2 18 1.5
Ball 3-5 0.6 63 0.2 18 1.5
Brand Name
TKU
Condition of Goods
New
Minimum Order Quantity
3Tons
Terms of Payment
L/C at sight or T/T
Terms of Sale
FOB Shanghai