Sell New Hydraulic Shears and Press Brakes From the USA

New Hydraulic Shears and Press Brakes From the USA You May Also Be Interested In: beds electrical hydraulic shears magnetic starters press brakes shears
We are pleased to offer the following investment opportunities for export:

Hydraulic Shears and Hydraulic Press Brakes

(USA Made)

Introduction: Hydraulic Shears

It takes a shear that can make a razor-sharp cut time after time. These overdriven and underdriven hydraulic shears are designed to do exactly that.

Choose from a family of eight different models: 1/8"(10GA) , 3/16", 1/4", 3/8", 1/2", 5/8", 3/4" & 1".

Designed simplicity and safety into shears -- with an advanced hydraulic system and flexible operation. They're easy to operate, easy to maintain and able to withstand the rigors of today's production demands. A wide range of options are available.

Push button and switch controls are at your fingertips. The fully guarded, 2-position 110V footswitch lets you interrupt the cutting stroke at any point in its cycle.

Easy Material Handling:
A sturdy backgauge and rake angle adjustment minimizes twist and distortion, making it possible to increase the rake for cutting heavier stock and extend maximum capacity of the machine. A 4 squaring arm with recessed scale makes for fast, easy measurement.

Modified High Carbon, High Chrome Reversible Knives:
Provide four separate edges for clean, burr-free cuts and long blade life. Easy blade gap adjustment means precise cuts for a wide variety of materials.

Electrical System:
Meets NFPA79 and construction requirements of the ANSI B11.4. All machines have disconnect switches, magnetic starters, 110/120 volt controls, and 220/460 voltages.

Shear is capable of shearing 1/8" (10 gauge) material to the following tolerance: Dimension - The width of the off-cut portion of the work- piece is within 10.005 inch of the backgauge setting.

Introduction: Press Brakes

Its versatile, accurate, rugged, easy to operate and easy to maintain. Thats the way these Press Brakes are made.

Whether you bend plastic or steel, theres a Hydraulic Press Brake to match your needs, ranging from the 17-ton model to the 350-ton. No matter the size, each machine features convenient operation for maximum output, ease of maintenance for maximum productivity.

These Machines go the extra mile and work hard, works accurately, and stays that way for years to come.

When your name goes on the finished product, so does your reputation. We feel the same way. Compare features. Compare results. You can count on first-class American technology, rugged durability, versatility and economy when its manufactured.

Simple & Flexible Controls:
Use either a convenient multi-switch control panel or a 3-position fully guarded foot switch.

Every machine is thoroughly inspected and tested. Parallelism is maintained between bed and ram, or at a preset angle, by using precise automatic leveling controls. Parallelism is maintained at 1 .002" in low speed.

The ram bottom reversal point is controlled by precise limit switches referenced off the bed. This isolates housing deflections which can interfere with accuracy.

The side situated handwheel sets the bottom limit of the ram stroke. Micrometer adjustment on the control end allows for tilting or paralleling of the ram. A bed referenced control monitors the actual distance between ram and bed, assuring repeatability independent of die wear or end plate deflection.

Press brakes have long, full tonnage stroke; adjustable length and selectable speed combinations; adjustable height for short stroke. A two-speed standard; three-speeds with infinitely adjustable low speed is optional. This option prevents sudden whip up of the work during bending operations.

Clevis mounted cylinders eliminate cylinder binding by reducing the possibility of oil leaks. Pins and bushings do not rotate under load, resulting in much less wear than competitive products.

Easy Hydraulic System Maintenance:
The manifold assembly saves space and makes it easy to replace many components. The convenient work height makes the job easier.

Convenient Settings:
Readouts in increments of .001" allows recorded settings of closed heights.

Standard Components:
The control system components, micro switches, clamp-type backgauge, hydraulic fluid and filter cartridges are all standard equipment, making routine maintenance easier.

2-speed ram is electrically controlled. It lets you shift to a lower speed before coming into contact with sheet metal.

The ram stops at the point of reference and self-levels at the bottom of every stroke. Main control cabinet enclosures are mounted in the right housing containing magnetic, non-reversing motor starter and 110/120 volt control circuit.

Safety and Reliability:
The control system operates at 110/120 volt using a minimum of circuitry. The system operates predominantly with American made electronics and American made motors.

All-steel ends, rams and beds.

Electrical Equipment:
Meets requirements of NFPA79. It includes drip proof, continuous duty 45: C ambient hydraulic pump motor wired for 230 or 460 volt, 3 phase, 60 hertz.

Ram Level:
Is accomplished by two hydraulic systems. One for each cylinder, which keeps them parallel. Self-levels at bottom of each stroke even if hydraulic system is out of adjustment.

Kindly let us know your interest in these investment opportunities for your markets and we can provide further specifications and details.

We anticipate your soonest reply and look forward to serving you in longterm relations.

Grace and Peace be yours always,
Darah Thomas
Owner/Import-Export Manager