Sell OP-4E1*Eth*RS232 PDH fiber mux

OP-4E1*Eth*RS232 PDH fiber mux You May Also Be Interested In: fiber mux local loop mux network manager pdh mux
4E1+Ethernet+RS232 PDH

product function:
Transfer 4 E1s,1 10/100M Ethernet and 1 RS232 signal through fiber .

product character:
(1) Provide 1 Ethernet interface (support VLAN, flow control, and self- negotiation; full/semi duplex, 10M/100M optional)
(2) Can provide at most 4 E1 channels transmission transparently, and 1 100M Ethernet data channel.
(3) Provide function of E1 remote loop, order Ethernet remote loop, fiber local loop, and 1 interface of phone(optional) .
(4) Jitter tolerance much better than GB.
(5) Power supply option: AC220V, DC-48V. The positive and negative terminal can be exchanged for DC-48V, easy for installation and maintenance.
(6) Network manager interface use SNMP .
(7) Two types:Standalone, desktop, 19inch; Card, usually be inserted in our rack 19 inch.

E1 interface:
Interface Rate: 2.048Mbps+-50PPM
Coding: HDB3
Interface signal coding: ITU-T G.703
E1 Impedance : BNC 75(Ohms) (unbalance) , RJ45 120(Ohms) (balance)
Interface character: match G.703
Jitter tolerance : match G.742 and G.823.

10/100 Base-T interface:
Interface Rate: 10/100Mbps
Interface character: match IEEE802.3, IEEE802.1 Q
Connector: RJ45

Fiber interface:
Interface: FC/SC
Wavelenth: 850nm/1310nm multi-mode, 1310nm/1550nm single mode.
Transmit distance: 2 Km for multi-mode, 40 Km/60Km/120Km for single mode.
Brand Name
Supply Capacity
Model Number