Sell PDA with 5" touch panel and support Windows XP

PDA with 5" touch panel and support Windows XP You May Also Be Interested In: card reader slot embedded memory touch controller touch panel wired lan
Display Screen 5 "TFT Touch Screen
Operating System (support) Windows XP / 7
Resolution 800 x 480 pixels
Aspect Ratio 16:09
MicroProcessor INTEL ATOM Z510
System Chipset Intel US15W
Frequency 1.1GHz
L2 Cache (KB) 512KB
FSB 533MHz
Hard Disk Drive (HDD) 8GB
Embedded Memory 1GB
Memory Type DDR2, 533
Memory Support SO-DIMM x 1 slot
Embedded Memory Max 2GB
Video Chipset Intel US15W
Video RAM (Default) 64MB
Max 224MB
Speaker 2 Speaker
Web Camera 1.3 Mega Pixel
Wireless LAN 802.11 b/g 54 Mbps
Wired LAN 10/100 Mbps
3G Link NA
Bluetooth Link Bluetooth 2.0
Card Reader SD, MS, MMC
AC/DC Power Adaptor 9V 2Amp,18W
Battery 2 cells 1800 mAh
Default OS DOS
Color Black or White
Material ABS Plastic
Dimension (mm) L160 x W95 x H22
Physical Weight with Battery 0.65 Kg
Interface "USB 2.0 x1
Card Reader Slot x 1
Audio IN/OUT x 1 "

If you have mass/big order, please feel free to contact with us directly.

Touch-screen charisma to subvert the traditional notion of touch, not only useless phone's keypad, but also to the previous single-point touch technology products paled.

Resistive touch screen for defects in capacitive touch screen emerged, compared to the latter need only touch of a finger without having to touch a stylus or pressure; the latter a better light transmission rate, to distinguish rate is higher; another capacitive touch technology uses glass outer layer, so compared to plastic outer layer of resistive touch, its fire, scratch-resistant, anti-fouling dust, anti-static performance, better, and without the need correction, life is also relatively long.

Based on capacitive touch technology, the above-mentioned advantages, so that multi-touch technology has the potential to achieve, iPhone (Multi-touch) multi-touch technology, then discard the traditional resistive touch, capacitive touch technology, using The "projected capacitive" (projective capacitive) techniques. With the traditional touch technique can only be communicated to the controller, compared to a contact information, multi-touch technology to record simultaneous multi-touch information, which involves the key components, including: display panels (Touch Panel) , the controller (Touch Controller) and software drivers (Utility) . It is mainly the use of projected capacitive double-layer glass, protective layer between the sensor network, changes in the electrostatic field, to sense contact location positioning. As long as the hand-touch screen, the controller calculates the hand and the capacitance between the parameters of the grid to calculate the coordinates of location of contact. In addition, to reduce interference with the signal, in the glass will be coated with thin-film indium tin oxide (ITO Layer) , and the protective film in order to prevent interference with electronic signals.
Supply Capacity
2000pcs /month
Lead Time from Order to Shipment
20 days
Minimum Order Quantity
5 units
Terms of Payment
Terms of Sale
FOB China