PET thermal lamination film
You May Also Be Interested In:
pet lamination film
pet thermal film
pet thermal lamination film
thermal lamination film
Paper core: 25.4mm(1 inch) ,58mm(2.25inches) ,76mm(3 inches)
3. Application parameter
Equipment for laminating film: dry and wet film laminator
Roller pressure: 10-20Mpa
Speed: 8-20 m/min
4. Directions for using PET thermal laminating film:
Normal process temperature is 900-1050, roller pressure and temperature vary with different types of paper, ink and machines.
When using the film for the first time or do other treatment, try a small volume before mass laminating.
Make sure the ink is dry before laminating. It will delaminate when the paper contains too much moisture and powder.
Make sure put the material in a low-temperature, dry place.