Pet recycling plant
You May Also Be Interested In:
pet recycling plant
Supply of Washing Line for 500-kg/hr Output consisting of:
1. Feeding Conveyer Belt US $ 05,000
2. Wet Grinder X 2 US $ 14,000
3. Drainage Auger US $ 02,000
4. Dynamic Centrifuge for Washing US $ 10,000
5. Decantation Cyclone US $ 02,000
6. Float Sink Tank US $ 10,000
7. Drainage Auger US $ 02,000
8. Dynamic Centrifuge for Drying US $ 10,000
9. Decantation Cyclone US $ 02,000
10. Storage Silo US $ 05,000
11. Control Panel US $ 02,000
Total Price for Complete Automatic Plant US $ 60,000
Price: FOB Mumbai
Payment: 50% advance & 50% against B/L
Delivery: 60 days
Packing: Sea Worthy Export Packing in wooden cases
Validity: 60 days
Warrantee: One Year
Installation: 2 Technicians for 15 days
Installation Fees: Round Air Tickets, Lodging & Boarding Expenses
Advising Bank: Bank of India, Saki Naka Branch, Mumbai 72, India
A/C No: 003820 1000 13568, Swift Code: BK ID IN BB ADH
Corresing Bank: Deutsche Bank Trust Company, NewYork, Swift Code: BK TRUS 33
Thanking you in anticipation of your favourable response.
We remain, yours faithfully,
FOR EUROPACK MACHINES (INDIA) PVT LTD
Feeding Conveyer Belt X 1:
For feeding in to the Crusher
Wet Grinder X 2:
Feed Opening (mm) 600
Size of Blades (Inch) 24
Motor Power (HP) 25
Max. Output (Kgs/Hr) 300
Screen Hole Size (mm) 12
1. Casting steel construction.
2. Double ball bearing.
3. Cutter hardness after heat treatment: hrc 60~65.
4. High-pressure water spray cleans oil & dirt on the surface of bottles quickly.
Drainage Auger X 2:
To deliver crushed flakes in to Dynamic Centrifuge for washing & Drying.
Dynamic Centrifuge X 2 (Washing & Drying) :
1. Used for stirring & washing flakes continuously.
2. One screen filter is located below the unit for filtering sand, dirt & contaminants.
3. Function of screw is for material delivery and washing.
4. One water spray device is located on the top to clean flakes again.
5. Washes as well as dries the material.
1. Steel construction.
2. Water contact surface is made of SS 304.
3. Material of screw: SS 304
4. Driven by electric gear motor
Float Sink Tank X 1:
Stainless Steel Construction, it receives the material from top and make final separation of the floating flakes from the sinking ones & is complete with:
1. Horizontal Auger for sinking materials extraction
2. Paddle Roller for conveying the floating material
Total Power Consumption: 10 HP
Tank size: Length- 8 ft x Width 4ft x Height 4ft.
Washed pet flakes, which are mixed with crushed caps & labels, are separated here by specific gravity. An auger screw is connected in the bottom of tank. It is able to deliver the crushed flakes into the next washing equipment. There is also an auger equipped on the top of the tank. It delivers floating material to the dewatering stage.
Storage Silo X 1:
To store the clean, dry flakes for further dispensing.
Control Panel X 1:
Consists of all the electrical controls.
Total power required: about 80 kW, total power used: about 60 kW
Water consumption: 1,000 liters/hr. Water used in the washing line, depending on the contamination of the material, if treated, can be reused.
To feed, check the line & collection of flakes we suggest 4 persons.
For a correct installation of the plant you need about 1000 m2.
Polyester Zips, Industrial Strapping, Fibre for Polyester Carpet, Fabric for T-Shirts, Athletic Shoes, Sheet & Films, Bottles for Hair Oil, Shampoo, Body Lotions, Floor Cleaners, Distilled Water & Pesticides.
1. Intrinsic Viscosity (IV) 0.65 dl/gm
2. Glass Transistors Temperature (Tg) 72.50 C
3. Melting Point (Tm) 215.60 C
4. Max. Moisture Content 0.30%
5. Overall Migration Nil
Advantages of Recycling PET:
1. Provides Clean Environment
2. Conserves of fossils
3. Preserves resources - Oil & by-products
4. Low Packaging Cost
5. Saving of Crude Oil to the Nation
6. Employment Generation