Sell Port Voip Gateway

Port Voip Gateway You May Also Be Interested In: ethernet connectors gateway ip phones voip voip gateway
Mostly thePort Voip Gateway is box with a power adapter interface, a RJ45 interface, a RJ11 interface and a IP key. Power adapter is used to connect to the power adapter, RJ45 interface is used to connect to LAN and RJ11 interface is used to connect the phone. The IP key has several usages. It can play the voice to announce the current IP address, it can used to enter into safe mode to retrieve the firmware, it can used to set the IP type and IP address.

When you take a Port Voip Gateway, first you need to connect it to LAN, phone and power adapter correctly. Then the Port Voip Gateway will boot up. After 30 seconds, it is in working mode now. At this time, you pick up the phones handset, you should hear dial tone or busy tone.

Port Voip Gateway Key Features:
1. H.323 and SIP , MGCP protocols support;Registration in Unlimited Gatekeepers;

2. Registration in Unlimited Gatekeepers;Full Compatibility with Cisco, Lucent, Quintum, IP phones, Soft phones;

3. All codecs capable of operating concurrently;Intuitive, user-friendly GUI interface;

4. Unlimited IVR profiles including ANI, PIN/ANI, pass-through authentication mechanisms;

5. Unlimited dialing plans/routing tables to allow custom routing based on Gateway IP address;

6. Provides fail-over of remote routes based on L3, L4, L7 remote service checks;

7. Full RADIUS/VSA support for complex Radius billing/CDR interfaces;Allows custom voice prompts and custom lang- uages;Allows Callback services based on two IP leg solution;

8. PC-to-Phone support with IVR support for VoIP clients for ANY codec;

9. Call Drops, Call Forwarding, and Advanced Number Processing support;

⑩ Additional QoS (Quality of Service) , Firewall, and Routing modules available;

Port Voip Gateway Electric Spec:
1. AC/DC adapterInput AC 230V, Output 9V DC, 650mA; Network interface:1 RJ-45 Ethernet Connectors;

2. FXS:1 FXS Connector; Operation temperature: 0 to 500 C (320 to 1220 F)  SIZE: 150 x 110 x 28 mm
Brand Name
Supply Capacity
Condition of Goods
Lead Time from Order to Shipment
Model Number
Minimum Order Quantity
Power Requirements
DC 12V
Terms of Payment
L/C at sight or T/T
Terms of Sale
Warranty Coverage
25 days