Pressurized solar water heater with heatpipe
You May Also Be Interested In:
high pressure solar water heater
pressurized solar water heater
pressurized solar water heater with heatpipe
solar water heater
This product is the high Pressure solar water heater.
The characteristic of high Pressure solar water heater with heatpipe
1) This type of solar water heater works with high pressure, so do the water it prodeces.
2) It uses the heat pipe to delivery the heat energy, it can works rapidly.
3) Because of no water in the vacuum tube, so there will not tube breakage in the winter. . 4) Each vacuum tubes can work alone, so it can still operate in the event of occasional tube breakage.
The material of this high Pressure solar water heater with heatpipe:
1) Inner tank:stainless steel--0.60mm.
2) Vacuum tube:QB-AL-N/AL-58-2000.
3) Outer tank:painted steel-0.4mm; stainless steel SUS304-0.4mm.
4) Frame:coated galvanized steel-1.5mm; stainless steel SUS430-1.5mm.
5) The masterial of insulation:polyurethane 50mm.
6) The reflector of this solar water heater:aluminum component; AL99.85% surface oxidation.
7) Copper coil:X12mm, thickness 0.8mm.
The details of this high Pressure solar water heater with heatpipe can get from us.
Type Area( m2 ) Vacuum tube Volume(liters) Gross wet(kg)
X(mm) Length(mm) Qty(pcs)
TZ47/1500-18C 2.25 47 1500 18 150 60
TZ47/1500-20C 2.50 47 1500 20 165 65
TZ47/1500-24C 3.00 47 1500 24 195 73
TZ47/1500-30C 3.75 47 1500 30 240 90
The Principle of this pressurized solar water heater can get from us.
The key words: solar water heaters, solar collector, solar energy, pre-heated solar water heater, solar water heater collector, high Pressure solar water heater with heatpipe, Pressurized solar water heater with heatpipe, high Pressure solar water heating with heatpipe