SDP/100SDP Series Multistage Stainless Steel Submersible Motor Deep Well Water Pump
You May Also Be Interested In:
deep well pump
deep well water pump
stainless steel submersible
well water pump
The pump consists of impeller, vane , pump body, inlet flap, outlet flap, shaft and bearing. The motor is applied with double-face mechanic sealing with "O" shaped rubber ring as static sealing.
The pump can work properly and continuously under following operational conditions:
1. Medium is not corrosive, sand contents should be max.0.10% by volume and granular size shall be max.0.20mm.
2. Medium temperature shouldn't be over 400 and Ph should be 6.5-8.5.
3. The pump should be operated with in rated head. The pump should be min.0.5m over the water bottom and single phase voltage 220V. three phase voltage 380V, and voltage fluctuation should be 0.9-1.1 times than the rated.
Designed for permanently immersed operation and comply with NEMA standards.
multistage deep well pump, submersible motor pump, submersible water pump, deep well water pump, deep well plunger pump, canned motor deep well pump, electric borehole submersible pump