Sell STNYAG-702A2 subsurface engraving laser machine

STNYAG-702A2 subsurface engraving laser machine You May Also Be Interested In: design graphics engraving laser machine subsurface engraving subsurface engraving machine subsurface laser
 This machine is designed for the personalized production. It adopts 200Hz laser power supply to improve the laser processing efficiency when engraving personalized product comparing with the 100Hz machine.
 Two engraving heads can engrave two crystals at a time. It yields like the machine of 100Hz / 4 engraving heads, but the engraving time is half when engrave one or two crystals, also it can reduce the engraving waster resulted from the operating mistake.
 Automatic location technology for crystals improves the position accuracy and shortens the position time of crystals on the worktable.
 Lead screw with high precision and intensity improves the location accuracy and stability.
 The automatic monitoring system of water temperature and water circulation ensures the working order of the machine.
 Interlock device on the door supply the safeguard for the operator.
 Four kinds of point-cloud converting methods are supplied in the software to obtain different engraving effect.
 Exceptionally small engraved dots represent lively the engraved graphics especially the 3d human face.

Main Technical Data
Laser: Lamp Pumped Nd:YAG 532nm Green beam
Frequency of laser power supply: 200Hz
Laser engraving heads: 2 Focus Lens
Engraving Speed: 8000-12000 Dots/min * 2 engraving heads
Max. Engraving Area: 300mmx200mmx90mm (for only one focus lens)
Motion Controlling Method: X-Y-Z axis (Three-dimension controlling)
Power Supply Connection: Single phase 220V+/-10%, 25A
Max. Power consumption 4200W
Weight and Dimension of Main Machine: Approx. 180Kg 760mmW670mmW1180mm (LxWxH)
Weight and Dimension of water chiller: Approx. 60Kg 750mmx440mmx750mm (LxWxH)
This machine includes one set of main machine, one set of water chiller, one computer (the point-cloud converting and engraving control software are installed inside) and spare parts.
Over 1000 3d design graphics library and one additional Xenon lamp shall be delivered with the machine.
3 to 5 days training shall be supplied in our company.
One transformer shall be supplied if the electrical system in your country is 110V.