SZG Series Double Cone Rotary Dryer
You May Also Be Interested In:
double cone rotary dryer
Double Cone Rotary Vacuum Dryer is a hybrid - a new type of dry in one dryer. The condenser, vacuum pump and drying machine, vacuum drying plant components. (Such as do not need solvent recovery, there is no need for the condenser) the advanced design, the internal structure of simple, easy cleaning, and materials can all be discharged, easy to operate, to reduce labor intensity to improve the working environment. At the same time, when turning the container material itself but also rotate the plot device is not the wall material, the higher heat transfer coefficient, drying rate, and not only save energy, materials and even fully dry, good quality. Can be widely used in pharmaceutical, chemical, food, dye and other dry materials industry. In line with the "GMP" requirements.
The scope of application:
The machine applies to medicine, food, chemical and other industries powder, granular materials and mixed vacuum drying, in particular, have the following requirements apply to the material:
Can not bear the high temperature of the heat-sensitive materials:
Easy oxidation, have dangerous materials;
Solvent Recycling takes materials and toxic gases:
Require a very low content of residual volatile materials;
Requirements of mixed full and uniform materials;
Double Cone Rotary Vacuum Dryer SZG double cone rotary tank, the tank in a vacuum state, access to the folder passed steam or hot water heating, heat through the tank wall contact with the wet material. Wet material after evaporation of water vapor absorption of heat through the vacuum exhaust pipe by the vacuum removed. Because of the body in a vacuum tank and the tank so that the rotation of the upper and lower material section constantly, both within and outside the earth, it accelerated the drying rate of materials, improve drying efficiency, to achieve uniform drying purposes.
Heating oil, the use of automatic temperature control, can be dry chemical and biological products and mineral raw materials, the temperature may be between 20-160 0, the temperature within 1 2 0.
High thermal efficiency, improve oven than 2 times.
Indirect heating, the material will not be contaminated, in line with the "GMP" requirements. Equipment maintenance is simple, easy to clean.