Sand Washing Machine
You May Also Be Interested In:
sand washing machine
Sand Washing Machine is mainly used for sand factory , electric pole factory, worksite of building and concrete dam to wash , classifying and de-watering various sands. This sand washer adopt inclination of 150, under the water tub, three weir plates form the sediment pool. The screw head is immersed in this pool, and the screw is driven by electric motor through reducer rotating continuously, and then the fresh water is feeding from porous plate at bottom of sediment pool, this machine are three functions of washing, de-watering, and classifying.
Working Principle of Sand Washing Machine:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Characteristics of Sand Washing Machine:
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.