Shaping Machine Model SM-500E
The machine is designed for cutting flat and formed surfaces on various kinds of small or medium sized workpiece. It can also be used to cut surfaces in special shape if equipped with a special vice or a dividing head and it is suitable for single piece and small batch production as well.
The main cutting motion of the machine is linear motion being converted from circular motion of gears by link block mechanism. With smooth transmission. Short overrun and less consume of power, the machine is easy to start and stop.
Being provided with a tool lifter, the machine table can obtain rapid motion in vertical, horizontal direction, spin and the switch of the impulse. The machine, with pleasing appearance and stable accuracy, can be operated and maintained conveniently.
Max. shaping length 500 mm
Number or ram strokes per minute (6 steps) 14-80 No. /min
Distance from lower edge of ram to the surface of table 100-370 mm
Max. travel of tool head 120 mm
Max. section of tool (WWH) 20W30 mm
Upper working surface of table (LWW) 440W360 mm
Width of middle T-slot on the upper surface of table 18 mm
Max. horizontal travel of table 525 mm
Horizontal feed of table per reciprocating stroke of ram 0.2-2.5 mm
Main motor 1430, 3 r/min, kw
Motor for rapid motion of table 1380, 0.55 r/min, kw
Overall dimensions (LWWWH) 2160W1070W1194 mm
Net weight (approx. ) 1600 kg
Flatness of machined surface on tested workpiece 0.025 mm
Parallelism of machined surface on tested workpiece to base 0.03 mm
Parallelism of machined surface on one side to that on the other side on tested workpiece 0.05 mm
Verticality of machined surface on the side of tested workpiece against base 0.02 mm
Surface roughness 6.3