Sell Silicone rubber fiberglass sleeving

Silicone rubber fiberglass sleeving You May Also Be Interested In: fiberglass sleeving silicone fiberglass silicone fiberglass sleeving silicone rubber fiberglass sleeving water test
a. Silicone rubber fiberglass (fiber inside and rubber outside) sleeving, woven as sleeving by non-alkali fiberglass and coated with silicone in high temperature. It has bettert dielectricity, automatic quench and softness than silicone rubber fiberglass sleeving, widely used in the insulation protection of internal line cluster in H&N machinery, household electrical appliances, electroheat device and special illuminations.

Technical index: Volume resistance:10"(Ohms)cm Automatic quench time: 10 seconds
Type/Certification Testing condition Inflammability Heat resistance Average voltage Individual
SGS-40 E233804 UL1441 UL VW-1 +2000-600 4000V 3000V
SRS-70 E233803 UL1441 UL VW-1 +2000-600 7000V 5000V
SPECIFICATION
ITEM VALUE
Continuous Operating Temperature -600+2000
Temperature Endurance 2000120 168小 时 >=1/2 former voltage value
Aging Test 2600, 6 hours, no crack
Cold Bend No crack
Horizontal Flame Test <30 seconds
(VW-1) Flame Retardance <30 seconds
Volume Resistivity 10"(Ohms)cm
Submerge Water Test Not gum, not distortion and emolliated

Inside diameter:
Inside diameter Wall thickness
Nominal Tolerance 4000V 7000V
0.5~2.0mm 0.2010.00mm 0.4010.05mm 0.5010.05mm
2.5~3.0mm 0.2510.00mm 0.4010.05mm 0.5010.05mm
3.5~5.0mm 0.3510.00mm 0.4510.05mm 0.5510.05mm
6.0~9.0mm 0.5010.00mm 0.5010.05mm 0.6010.05mm
10.0~12.0mm 0.7010.00mm 0.6010.05mm 0.6510.05mm



b. Silicone rubber fiberglass (rubber inside and fiber outside) sleeving, forms sleeving by extruding silicone rubber, adds woven fiberglass and coated with silicone in high temperature. It has superb insulation and heat resistance protection, widely used in the insulation protection of internal line cluster in H&N machinery, household electrical appliances, electroheat device and special illuminations.
Inside diameter dimension: (technical index, performance parameter refers to a)
Inside diameter Wall thickness
Nominal Tolerance
1.0~2.5mm 0.2010.00mm 0.8010.05mm
3.0~5.5mm 0.3010.00mm 0.9010.05mm
6.0~7.0mm 0.3510.00mm 1.0010.05mm
8.0~9.0mm 0.4010.00mm 1.1010.05mm
10.0~12.0mm 0.5010.00mm 1.2510.05mm

Technical index: Volume resistance:10"(Ohms)cm Automatic quench time: 10 seconds
Type/Certification Testing condition Inflammability Heat resistance Average voltage Individual
SRS-70 E233803 UL1441 UL VW-1 +2000-100 7000V 6000V
Brand Name
DICORE
Certifications
UL
Available Colors
all colors
Condition of Goods
NEW
Minimum Order Quantity
500M
Terms of Payment
T/T
Terms of Sale
FOB SHENZHEN,CHINA