Spin pull tool
You May Also Be Interested In:
blind rivet nuts
The spin pull tool is intended for installing blind rivet nuts in the following materials and sizes:
aluminum: M4, M5, M6, M8, M10, M12
Steel:M4, M5, M6, M8, M10, M12
stainless steel:M4, M5, M6, M8, M10, M12
Traction power at 6 bar:29800N
Nose holder dia. xL:25x75mm
The spin tool is provided with a fully automatic air motor for screwing nuts on and off. First screw the nut one turn on the mandrel. By pushing the nut straight against the mandrel, the mandrel will start to rotate in clockwise direction to screw the nut on. Ensure that the collar of the nut is facing towards the nose piece. The rotation stops automatically when the nut hits the nose piece. Place the nut in the material. Be sure to use the correct hole size. The following rule of thumb applies: The hole size in the material is 0.1mm larger than the outside diameter of the nut.
The nut is installed by operating the trigger. The mandrel automatically rotates anti-clockwise and comes off the nut when the trigger is released. The next nut can now be placed on the tool. The time of anti-clockwise rotation can be set by turning the adjustment screw. By turning the screw clockwise the time of rotation is enlarged.
By pushing the push button, extra anti-clockwise rotation is possible.