Surge Protectived Device
You May Also Be Interested In:
surge protective device
JVS1 Surge Protective Device series (referred as SPD) provides protection against surge current resulted from direct or indirect lightning strike or other instantaneous overvoltage.
one pole: provide protection against surge current of circuit single phase 220V.
Two pole: provide protection against surge current of L and N phase to earth of circuit single phase 220V resulted from lightning.
Three pole: provide protection against surge current of S phase of TT, TN-S system 380V, and also protect S to earth of IT TN-C system of 380V
Four pole: provide protection against surge current against S, N to earth of TT TN-S system of 380V.
The device shall be mounted indoor with less exposure onto Din rail 35mm
The device shall be installed prior to the circuit breaker and shall be reliably connected to earth with resistance not exceeding 4(Ohms) and cross section of conductor not less 6mm2
The device is equipped with warning display. Green colour from the indicating window is for normal operation, and red colour is for function failure. The function unit shall be checked regularly and the unit shall be replaced upon any failure being detected.