Sell T-HxxxxP alum foil plain tape (rubber adhesive)

T-HxxxxP alum foil plain tape (rubber adhesive) You May Also Be Interested In: alum foil alum foil tape alum. foil foil tape rubber adhesive
T-HxxxxP
ALUMINUM FOIL TAPE - HIGH QUALITY
PRODUCT DESCRIPTION:
Foil: T-H2201P(22u) , T-H2601P (26u) , T-H3001P (30u) , T-H4001P (40u) , T-H5001P (50u)
Adhesive: high performance synthetic rubber-resin adhesive,
Liner: easy-release silicone release paper.
FEAUTURES:
1. Aluminum backing provides excellent reflection of both heat and light.
2. High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
3. Low moisture vapor transmission rate.
4. Service Temperature range from -200 to +800C (-40 to +1760F) .
TYPICAL PHYSICAL PROPERTIES:
PROPERTIES METRIC ENGLISH TEST METHOD
Peel Adhesion 25 N/25mm 90 Oz. /In. PSTC-1
Rolling Tack (11mm ball) <= 20 cm <=8.0 In. PSTC-6
Holding Power 5,000+ Min. 5,000+ Min. PSTC-7
Service Temperature Ranger -20 ? +80 0 -4 ~ +176`F ----------


TYPICAL APPLICATIONS:
HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.
PRODUCT FORM & SIZE AVAILABLE:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4") .
Log Roll:1200mm x 45 / 50m Jumbo Roll: 1200mm x 1200m
STORAGE & SHELF LIFE: One year when stored at 21?C (70?F) / 50% relative humidity out of direct sunlight.
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10 ~ +400C (+50 ~ +105 ?F) .