USB Fingerprint Access Control System With ID /Mifare Card
You May Also Be Interested In:
fingerprint access control
fingerprint access control system
fingerprint control system
usb access control system
F2-ID New fingerprint access control is developed based on ZEM500 platform. Complete industrial design, can working offline, a sound wiegand signal. It can match with most of the access controllers on the market. With wiegand in functions to support the main machine, the machine itself can external connected with wiegand reader. Its remarkable advantage is that super-stable multi-machine network connection. and the first choice in security project. F2-ID is suitable for the bank, the armed forces, the engine room, etc, high security needs of units.
1. Support wiegand 26 or user-defined format, match professional access controller.
2. Lock control signal output, can be one stand system.
3. Adopt ZKFinger latest algorithm and intel32 bits processor.
4. ZEM500 motherboard
5. USB port
6. Stability protection: reset switch, hardware watchdog, communication setting initialization by hardware, anti-over voltage and over current protection
7. Dismantle alarm, threaten alarm , unlock illegally alarm , not block alarm , TTL output
8. Easy to install all the cable connection EM lock installation are the same to the traditional IC/ID Access control
9. Option for built in Mifare reader
10. External connected with IC/ID reader. Card+ Fingerprint validation mode
11. Can be matching the latest international trends of the Web Server Management System
1. User capacity : 1500
2. Transaction capacity : 50000
3. Hardware platform: ZEM500
4. Operating system: Linux
5. Verification mode : 1:1 or 1:N
6. Sensor: ZK Sensor
7. Algorithm version : 2007 Version ZKFinger V8.0 new algorithm
8. Access Control : 50 time zones, 5 groups, 10 open door combination, support multi-users enter, 10A/12VDC relay switching value or output voltage.
9. U-disk: Support upload and download attendance date and short message.
10. Communicational: TCP/IP or RS232 and RS485
11. Collection station: ZK collection station, with resolution of 500DPI.
12. Identification speed: <=2 seconds
13. FRR: <=0.01%
14. FAR: <=0.0001%
15. Power supply parameter : 12V DC, watchful waiting current<50 mA, working current<400mA
16. Operating environment : Temperature 00-450, humidity 20%-80%
17. Card Type:ID card.
18. Weigand In function: ID card reader could connect toit directly
19. Language: Multi-language version
20. Software : Support real time monitor access control software, fingerprint reader software and T&A software and so on
21. Size: 145 x 118 x 45 mm