VTL-12 Copper clad aluminum equipment
You May Also Be Interested In:
copper clad aluminum
copper clad aluminum wire
The machine equipment:
1. Copper clad aluminum wire is produced with the production process of cladding welding-drawing method, by cladding polished copper strip concentrically on the outer surface of the aluminum core, via several times of drawing and heat treatment, to meet customers' technical requirement on line diameter, mechanical property and electrical property, Aluminum rod pre-drawing machine ------Pre-drawing the aluminum rod to#8.5mm on the#1200 drawing machine
2. Cleaning ------put the pre-drawing the aluminum rod in the No.1 flume where there is 4~7% NaOH, then put it into the NO.2 water flume , then put it into the NO.3 flowing water flume and cleaning and airing .
3. Aluminum rod releaser
4. Copper strip releaser
5. Copper strip cleaning and drying------clean the copper strip in the small water box where there 5~10%scour , and filter the water , and wipe the water
6. Aluminum rod and copper strip brushing , two sets of blower for collecting the copper and aluminum scraps
7. Arc welding clad machine , by cladding polished copper strip concentrically on the outer surface of the aluminum core;
Remark : Draw the wire in the same day after u weld the Copper clad aluminum rod .
9. Single head drawing ------Roll the end of the CCA wire, drill through the 1~3 molds , and drawing the wire on the#1200 , #1000, #800 on the drawing machine one by one.
10. Winding and inspecting ------ Inspecting and removing the vice wire , and welding by the cold welder machine .
11. Products ------ winding the products , and packing it.