Sell Vibration-Absorber

Vibration-Absorber You May Also Be Interested In: copper fittings metal hose metal rings silver solder vibration absorber
Metal hose which has excellent flexibility and vibration absorbing capacity, is covered tightly by high intensity protecting metak net adn hooped by two metal rings at ends with copper fittings therdfore it also has better pressure-resistant capcity.
When youplace an order, please specifyfolows:
1. Product type
2. Nominal diameter, norninal pressure, working temperature
3. Special requirements if any

Application:
Use for connection between circulating tubes and compressors of air-conditons, refrigerators, congealers, and etc to absorb vibrtion caused by the compressors and protect the whole tube system.

Installation Instruction:
1. Hose shall be kept in horizontal or vertical position, which is not in line with compressors, to avoid static prlling or pressing stress.
2. Any collision with hard ting shoule be avoided before or after installation, and abrasion of corrugation with hard thing also should be avoided during using.
3. The end of be soldered in must be protected form excessive heating or de-soldeving by means of wet tape or heat insulation paste for btrazing prscesses, a silver solder type with low processing temperature has to be used, e. g. L-Agaosn and fluxing agent F-SH1

When you place an order, please specify follows:
1. Product type
2. Nominal diameter, nominal pressure, working temperature
3. Special requirements

Specifiation
Type A B C D F Psig Psing
SLBZ10 3/8" 3/4" 7" 8-1/2" 1/2" 500 2500
SLBZ12 1/2" 7/8" 7-1/4" 9" 1/2" 500 2500
SLBZ15 5/8" 15/16" 8" 9-7/8" 1/2" 500 2500
SLBZ20 3/4" 1-1/4" 8-1/16" 10-1/2" 1/2" 500 2500
SLBZ22 7/8" 1-3/8" 9-1/4" 12" 1/2" 500 2500
SLBZ25 1-1/8" 1-1/4" 9-7/16" 13" 1/2" 500 2500
SLBZ32 1-3/8" 2-1/16" 11-7/16" 15-1/2" 1/2" 500 2500
SLBZ40 1-5/8" 2-1/4" 12-3/8" 16-15/16" 1/2" 500 2500
SLBZ50 2-1/8" 2-11/16" 15-3/16" 20-1/2" 1/2" 400 2500