Welding Wire EM12K
You May Also Be Interested In:
DESCRIPTION AND APPLICATIONS
H10MnSi is a copper coated solid steel wire, suitable for a wide range of general purpose and structural steels SAW applications. When used with the LJ-SJ501 flux it produces weld deposits with improved tolerance to rust and mill scale.
TYPICAL ALL WELD METAL ANALYSIS (Wt%)
C Mn Si P S Cu
<=0.14 0.80-1.10 0.60-0.90 <=0.030 <=0.030 <=0.20
TYPICAL ALL WELD METAL MECHANICAL PROPERTIES
YIELD STRESS >=400
TENSIBLE STRENGTH 480-650
(In combination with LJ-SJ101 agglomerated flux)
NOTE ON UASAGE
Dry the flux at 300~350 for two hours before use.
Pay attention to welding voltage. Excessive welding voltage causes deterioration of joint properties.
Add new flux periodically to prevent the weld defects and bad bead appearance which occurs when continuously reusing the flux.
TRADE NAME LJ- H10MnSi
PACKING PALLET PACKING
One coil to a poly plastic bag, then put to carton 400KG /600KG /800KG /1000KG on a wooden pallet