Wireless Home Alarm System
You May Also Be Interested In:
home alarm system
wireless alarm system
wireless home alarm
wireless home alarm system
1. Zone display: LED digital display, indicates zone of intrusion
2.10 seconds voice record function
3.6 zone capability: Pre-stored alarm event such as fire-alarm, intrusion, gas leakage.
4.6 groups lines alarm automatically: The main unit will advise alarm status and also display the alarm zone
5. Power off protection: All input data including pin codes will not be affected in a power failure
6. Separate arm and delay arm function
7. Recognize alarm events: Can inform through telephone the cause of alarm i. E. Intrusion, fire, gas or smoke by number of beeps.
8. Remote access function, remote arm, disarm, start up siren etc
9. Easy to add on additional detectors if required
10. Anti-tamper function: The alarm will activate if the telephone wire is cut off
11. Code protection: All actions cannot be processed without the correct code; You can change the code any time.
12. Dial to extension number, or extension number dialing out for alarming
13. Standby batteries
1. Supply Voltage: 9-12VDC
2. Arming Current: 14mA
3. Disarming Current:13mA
4. Silent Alarming Current:25mA
5. Sound Alarm Current: 260mA
6. DB Output: 110DB
7. Operation Frequency: 315MHz or 433MHz 10.2MHz
8. RF Sensitivity: -105DBm .
9. Ambient Temp: -100~+500
10. Relative Humidity: <95% .