You May Also Be Interested In:
mini electric motor
Water pressure: 0.02~0.8MPa
Power supply: 3.6V/6Ah lithium dry battery
Induction distance: 50~250mm
Ambient temperature: 0~550
Diameter of in-out let pipe:M24 X 1
Material: ABS engineering plastic
1. Mini electric motor drive, small volume (only 10mm) , low power consumption (dynamic current: 30mA, one tenth of electromagnetic valve) , high reliability.
2. Single-stationary-state fluidic valve adopts the technology of controlling water through water pressure, no mechanic wear, quite small strength of switch. It, high in reliability, small in volume, can be used normally under 8kg water pressure.
3. No electric contact, no electric contact firing and adhesion like the electromagnetic valve, it is high in reliability.
4. Design of preventing from obstacles, no special demand to water quality.
5. The products are sanitary, safe, energy-saving, reliable, and strong in capacity of anti-interference.
6. The control circuit is designed to be high in consumption-saving effect (static current 0.002mA, dynamic current 30mA) , and double power-saving dormancy circuit.
7. Adopting lithium dry battery with a large capacity, it can be used more than 400 thousand times (5 years or so) . It is not necessary to change the battery frequently.
8. No strong power like power pressure transmission and electromagnet, it is good in safety.
9. It's designed to be turned off automatically when the water is flowing more than 1 minute to avoid water wasting caused by obstacles in the induction zone.
10. Simple in installation, battery driving. Circuit wiring is not needed, it only needs to be connected with the in-let pipe, the faucets can automatically enter into normal operation procedure.