co2 fractional laser system
You May Also Be Interested In:
fractional co2 laser
fractional laser system
The CO2 Fractional laser is specially used in dermatology, cosmetology, dispelling wrinkles around eyes and mouth , removing the acne scar , surgery scar and traumatic scar, and getting rid of benign derma neoplasm.
The CO2 Fractional laser is set industrial man-machine interface with digital color display. Operators could use the Function-Choose-Buttons to choose the preferred function, like Scan mode, Impulse mode, Setting, System info.
Fractional laser working principle:
With fractional co2 laser resurfacing, the laser beam is broken up or fractionated into many small micro beams which are separated, so that when they strike the skin surface small areas of the skin between the beams, the skin would not be hit by the laser and left intact.
These small areas of untreated skin promote a much more rapid recovery and healing time, with less risk of complications. While the small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant in facial skin rejuvenation.
As there treated areas are much smaller than the surrounding healthy tissue, the healing time is significantly shortened. Most fractional co2 laser patients heal in less than one week for facial treatments. It provides results almost as good as traditional full-surface co2 laser, but with far less risk, downtime, infection and complication.
Nicely, it can also safely treat other area besides face, producing excellent results in treating neck, hands and back, such as skin laxity, acne scars and wrinkles. But only one to two treatments are needed for up to an 85% improvement.
Traditional full-surface co2 laser treatments are performed by using a beam of intense laser energy, which is passed over the skin surface to vaporize the entire top layer of skin. The damage to the tissue is extensive, it takes at least two weeks to heal and regrow a new top layer of skin(i. e. , re-epithelialize the entire top layer of skin)
It is applied in stripping, cutting and vaporization. Specially, for skin rejuvenation, improvement of pachylosis, large pores, complexion unbalanced and so on. It has notable effect of removal scars, winkles, pigmentation, stain, acne, moles, nevus, hemangioma, skin tag and so on.
Melasma(mask of pregnancy)
Skin resurfacing (to improve texture)
Wrinkles around the eyes and mouth
Pigmented lesions: age spots/ brown spots/ sun spots
Red vascular removal
Micro Pulse Energy
5mj-100mj, 16 steps adjustable
F=50mm(generation 2) or f=100mm(generation 1)
Focus Spot Diameter
<=0.1mm(generation 2) <=0.2mm(generation 1)
20005m(generation 2) 6005m(generation 1)
green semiconductor laser (532nm, 5mW)
Smoke Exhausting System
Built-in air blow
Built-in circulating water cooling
Color LCD (8 inch Touch Screen)
7-Articulation Joint Spring-Balanced Light Guiding Arm
With scanner (galvanometer scanning)
scanning area: 0.1W0.1mm-15W15mm(generation 2)
scanning graphic: Rectangular, Ellipse (standard)
Scanning velocity: 0.1 to 9 cm2/s adjustable
CW: output power, 1-30w, 1w adjustable
Pulse: interval time, 0-999ms, 1ms adjustable
Ultra: Frequency, 1000hz, 1hz adjustable
450mmW 550mm W1400mm
AC 220V122V; 50hz, 3Amp