full-automatic PET blow molding machine
You May Also Be Interested In:
automatic blow molding machine
full automatic blow molding machine
pet blow molding machine
pet molding machine
2cavity and 4cavity design for different capacity requirement for PET bottles.
Adopt Festo cylinder, Festo Valve, Omron PLC etc. pneumatic parts.
A.1. The preforms will be automatically transmitted to the place where they will be put in order automatically on the preform sideway.
2. The heating-heads gain the preforms in succession at the entrance and the correspondence system will control the prefoms to get the accurate temperature when they are heated by infrared ray, meanwhile, the temperature in different level is showing clearly on the touch-screen.
3. The protruding wheel will control the mould frame to open and close completely, to change the speed of locking mould, meanwhile, the bottle-blowing parameters for every moud cavities will be controlled and showed on the screen. (The control system adopts the advanced technology from Japan and Germany) .
4. After the formation of the bottles, the machinery hand will automatically take them out from the moulds, automatically check and get rid of the defective goods. The bottles will be layed down from the band carrier the defective goods.
B, Function and advantage
1. Automatically put and arragne the preforms in good order, the whole process is steady and reliable, the preforms are offered from the storage of the hopper automatically, and the heating system is perfect, the temperature for every section of the preform can be regulated freely.
2. Infrared oven ventilation cooling system, service life of the machine is long, with very high effenciency of the heating oven.
3. Infrared oven checks the temperature automatically after preforms are heated, to ensure the unaninous temperature, to avoid the defective products.
C, Automatically taking and putting the preforms, taking out and putting the bottles in good order.
D, The checking system can examine the defective bottles carefully.
F, Changing moulds quickly, highly automatic, little bottle pollution.