Sell hand feeding Blow Molding Machine

hand feeding Blow Molding Machine You May Also Be Interested In: semi automatic blow molding machine
ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it cant transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine.
Settings:
a) . PLC colour display: OMRON(JAPAN)
b) . Pneumatic parts:FESTO(GERMANY)
c) . Controller of preform transfer:Servo motor National(JAPAN)
d) . Other electric parts are all world-famous brand
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.2 percent.
TYPE
ITEM
ZQ-A600
ZQ-A600-2
ZQ-A1500
ZQ-A1500-2
ZQ-A5000

CONTAINER
Number of cavity
1
2
1
2
1

Theoretical output
1100-1400pcs/hr
1500-2200 pcs/hr
1000-1300 pcs/hr
1500-2000 pcs/hr
500-700 pcs/hr

Max. container volume
0.6L
0.6L
1.5L
1.5L
5L

Max. neck diameter
65mm
65mm
80mm
120mm
120mm

Max. container diameter
86mm
86mm
105mm
200mm
200mm

Max. container height
260mm
260mm
350mm
350mm
350mm

ELECTRICAL SYSTEM
Number of lamp
14pcs
28pcs
28pcs
28pcs
28pcs

Max. heating power
21kw
42kw
42kw
42kw
42kw

Installation power
23kw
44kw
44kw
44kw
44kw

Actual power consumption
10kw
14kw
12kw
16kw
16kw

AIR SYSTEM
Operatating pressure
7kg/cm2
7kg/cm2
7kg/cm2
7kg/cm2
7kg/cm2

Low pressure consuming
800Ltr/min
1000 Ltr/min
900 Ltr/min
1200 Ltr/min
1200 Ltr/min

Blowing pressure
<=40kg/cm2
<=40kg/cm2
<=40kg/cm2
<=40kg/cm2
<=40kg/cm2

High pressure consuming
1200-1600Ltr/min
1500-2000Ltr/min
1200-1600Ltr/min
2000-2500Ltr/min
2000-2500Ltr/min

CHILLER WATER
Operating pressure
5-6 kg/cm2
5-6 kg/cm2
5-6 kg/cm2
5-6 kg/cm2
5-6 kg/cm2

Temperatuer
100
100
100
100
100

Consuming
3600kcal/hr
5600kcal/hr
3600kcal/hr
5600kcal/hr
5600kcal/hr

Flow rater
20Ltr/min
30Ltr/min
20Ltr/min
30Ltr/min
30Ltr/min

MACHINE
Machine dimension
2.0W1.35W1.7(m)
2.1W1.35W1.7(m)
2.1W1.5W1.7(m)
2.2W1.8W1.7(m)
2.2W1.8W1.7(m)

Machine weight
1.5T
1.8T
1.6T
2.0T
2.8T
Certifications
CE
Condition of Goods
New
Terms of Payment
T/T
Terms of Sale
FOB NINGBO, FOB SHANGHAI