injection blow hollow molding machine
You May Also Be Interested In:
injection blow molding
injection blow molding machine
Here is the injection blow hollow molding Machine characteristics:
1. Thanks for advanced mould with hot-runner, easy to adjust technology.
2. electrical-control servo-motor system, keep stability, high-precision, correct of four-positionrotation.
3. hydraulic system adopting three pumps to feed oil, adopting double-ratio and multi-stress adjustment device, which control stress, hydraulic-feeding system, hydraulic-balance system, and the possibility of high-stability betweenhydraulic-balance system an other working partsystems.
4. Thanks to PLC automatic electrical control system, man-machine interface, touch-type display; keep machine easy to operate.
Our machine product features:
1. Excellent mechanical strength , impact resisting , and non-cracking
2. bottle mouth and thread are of precise measurement , enabling 100% close match with the bottle cap.
3. The weight of the product can be pre-setidentically .
4. The measurement and thickness of the product can meet the requirement of the design without anydeviation.
5. The surface of the bottle mouth and the body is good iuster and smoothness.
6. No rough selvedge will occur at the mouth or bottom of the bottle products which saves the costof the raw material .
7. On the bottom of the bottle there is no joint seam, and the strength is improved.
8. The joint seam on the bottle body is smooth.