lead free soldering tips, soldering iron,
You May Also Be Interested In:
lead free soldering
Suit for: Ourdoors soldering
3 NI MH batteries Power supply
Kind: Soldering station
Dual input: DC4.5V
Operating Temperature: 896 F 480 degree
To prevent the risk of injury or accident, READ and UNDERSTA ND the following warnings and how to use this tool. Keep this manual for future use.
Feauters: Turn on the battery cover and put alkaline battery size AA1.5V 3pcs in right position as illustrated, then turn the cover off.
HOW TO MOUNT THE TIP: Plug in the tip to mount and pull out to dismount as illustrated below. The metal remover tools 110 30 will help you to do it easily.
Push on the slide switch to "ON"Position. (it does not work in "OFF"position of slide switch.
Press the power button, the LED indicator lights up and the tip starts to heat up, in about 10 seconds, it might
Melt the solder, and you can start to work. ATTENTION: When the LED indicator becomes dark, or it takes more than 30 seconds to start solder melting, please replace with new batteries, as the batteries are less power.
Power keeps on only while you are pressing the button, so remember to release the power button right after operation, otherwise the tip keeps heating up while pressing the button. Timely intermittent press and off will make temperature controlled possibly and battery life will be prolonged.
After operation, clean up the tip, then plate new tinning layer on it, and return slide switch back to "OFF"Position, put on the protective cap.
the qulity of our lead free iron tips:
1) special order for particular soldering tips which are of same type and size as intended brand products are availble on custom request
2) tips shown are not actual sizeand are some waht differences form the actual products pls refer to samples and to consult the chanton salesdepartment in case of purchase product model, parameter, and capability are subject to change due to the improvement of products
3) all dimension about tinning and subject to the manufacturing (chanton) tolerances
4) the lead free soldering is of 30C higher melting point than the ordinary solder, therfore the soldering aid will stick on the surface of tips due to hightemperature carbonization. this will result in repellence between tips and solder. to facilitate soldering process , frequently cleaning of tips is recommended.
We have been continuously improved technology and kept in the leading position in domestic and overseas trade. at the same time we also run OEM. ODM according to the demand of customers