Sell monoblocks filling machines for mineral water , pure water and fruit juice

monoblocks filling machines for mineral water , pure water and fruit juice You May Also Be Interested In: air transportation filling machines fruit juice pure water
The monoblocs filling machines for mineral water , pure water and fruit juice

1) . Simple introduction about monobloc filling machine for mineral water , pure water and fruit juice

The monobloc filling machines for mineral water , pure water and fruit juice have the three- function of washer, filler and capper in one body, adopting full automation in production process. The machine unit makes by high quality stainless steel, key parts are machined on NC tool. The machine unit uses advanced photoelectric detection technology to detect each part's operation condition: no bottle no filling, no bottle no capping. Human- computer interface operational screen make it automation.

2) . Working process

The bottle enters into washing, bottling, capping units through air transportation channel and then pass to the washer of bottle washing, bottling and capping units by means of the starry wheel. The gripper installed on the rotary disk of washer holds up of bottle and turns it over 180 degrees along guide way and makes the bottleneck face ground. In the special washing area, the nozzle on the gripper sprays water to wash inner wall of bottle. After washing and drying as well, the bottle turns over 180 degrees along the guide rail once again and make the bottleneck faces sky. Then cleaned bottle is transferred to the bottler from washer through bottle starry wheel. The bottle that enters into the filler is clamped and held up by neck holding plate and do the ascending and descending motion on the effect of cam. Then the bottling valve is pressed and opened by mouth of bottle moving up and bottle the bottle by means of gravity. When finishes bottling bottle, the bottle will move down and leave off bottling valve. The filled bottle will convey into capper by starry wheel. The clamp on capper will keep the bottle upright and not rotating by clamping neck. The cap screwing head keep in the condition of revolution and autorotation and realize catching, loading, screwing discharging cap on the effect of cam and finish the full capping process. The final product is transferred to bottle outlet conveying chain and out of three-in -one unit.


JR-14-12-5 monobloc filling machine for mineral water , pure water and fruit juice is 5000B/H(600ml)
JR-16-16-5 monobloc filling machine for mineral water , pure water and fruit juice is 8000B/H(600ml)

JR-32-32-8 monobloc filling machine for mineral water , pure water and fruit juice is 12000-15000B/H(600ml)

JR-40-40-12 monobloc filling machine for mineral water , pure water and fruit juice is 16000-18000B/H(600ml)

JR-50-50-12 monobloc filling machine for mineral water , pure water and fruit juice is 20000-25000B/H(600ml)

JR-72-72-18 monobloc filling machine for mineral water , pure water and fruit juice is 30000