You May Also Be Interested In:
Pruduct Name : scaffolding
The above photo is our logo on alibaba. It is two main products of all our products.
components of assembling
1. wooden planks-
clean site and lay the wooden planks at the ground in horizontal position.
2. jack base-
it is a base seat for adjusting and fixing the required scaffolding length above the wooden planks.
3. Main frame-
insert the main frame into jack base section in per pendicular position.
4. cross brace-
for fixing the main frame in each span of scafolding.
5. joint pin-
insert into the top of main frame for joining the required dimension.
6. horizontal frame or catwalk(steel scaffolding plank) -
it is a lateral pipe for frmaes used for fixing the main frame to complete the first floor scaffolding. (it can be erected with about 2 to 4 spans in each high rising floor alternately)
7. Wall tie(keeper joint) -
use wall tie to prevent the frames from swaying down due to strong wind and unstable ground. Fasten the ties to walls every 4 span horizontally and every 4 frame , vertically.