Sell separated pressurized solar water heater

separated pressurized solar water heater You May Also Be Interested In: pressurized solar water heater separated pressurized solar water heater separated solar water heater solar water heater water heater
Here is the simplest of installation configurations for the HM series Solar water heaters. The tank is low pressure, open vented. The tank is manually filled by opening a tap in the house. Once the tank is full water runs out through an overflow pipe which is fed back down into the house. When water starts flowing out the tank is full. When using water the tank gradually drains until it is empty. Once accustomed to the method of operation, the user knows how much water is left in the tank and can fill it up at the appropriate time
This is the simplest of installation configurations for the thermosyphon tubular solar water heater. The tank is low pressure, open vented. The tank is manually filled by opening a tap in the house. Once the tank is full water runs out through an overflow pipe which is fed back down into the house. When water starts flowing out the tank is full. When using water the tank gradually drains until it is empty. Once accustomed to the method of operation, the user knows how much water is left in the tank and can fill it up at the appropriate time.
Depending on hot water usage pattern and weather conditions, the hot water can be used directly for showering, or can be used as a pre-heat, feeding the inlet of an instant or tank water heater.
Description:
This is the simplest of installation configurations for the thermosyphon tubular solar water heater. The tank is low pressure, open vented. The tank is manually filled by opening a tap in the house. Once the tank is full water runs out through an overflow pipe which is fed back down into the house. When water starts flowing out the tank is full. When using water the tank gradually drains until it is empty. Once accustomed to the method of operation, the user knows how much water is left in the tank and can fill it up at the appropriate time.
Depending on hot water usage pattern and weather conditions, the hot water can be used directly for showering, or can be used as a pre-heat, feeding the inlet of an instant or tank water heater.
Description:
B series solar water heaters are all-glass evacuated solar domestic water systems combined with heat pipes inside the glass tube. The selective coating on the inner tube converts solar energy into heat energy and transfers to the heat pipe by an aluminum fin. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat conducts the water inside the tank and the vapour becomes liquid, returning to the base of the heat pipe. This continuous circulation transfers heat from the heat pipe to the cold water in the tank as long as sun is heating the collectors. Hot water can be obtained by injecting cold water from the bottom of the tank
Features:
Some advantage compare with B series
 The system will still operate in the event of occasional tube breakages;
 Can operate with water pressure up to 0.4MPa;
 No additional device for automatic filling water to the tank;
 More pressure, more comfortable;
series:
Model 30CP47 20CP58 24CP58 30CP58
Volume of Storage Tank 165L 165L 195L 240L
Numbers of Tube 18 20 24 30
Length of Tube 1500mm 1800mm 1800mm 1800mm
Inner/Outer Diameter of Tube #47mm/#58mm #47mm/#58mm #47mm/#58mm #47mm/#58mm
Outer Shell of Tank Galvanized steel Sheet, Surface plastic painting Thickness: 0.6mm
Stand Galvanized steel Sheet, Surface plastic painting Thickness: 2mm
Insulating Layer Foaming polyurethane, Thickness: 67.5mm
Inner Tank 316L Stainless steelThickness: 1.5mmArgon welding technology
End Cover 316L Stainless steelThickness: 2mm
Evacuated tube Absorptance: >=94%Emittance: <=6%
Working Pressure Normal working pressure: 3-6kgTest pressure: 10kg
Reflector aluminum (320G) component: Al 99.85%surface oxidation
Tailstock ABS plastic material
Collecting Area 3.38m2 2.40m2 2.88m2 3.60m2
Angle of Stand 33oand 50ofor flat roof, 45ofor tilted roof
Heat Loss Coefficient W/m3K
Dailey Efficiency >50%
Inlet/Outlet Connections G 1/2
Optional Electric Booster 1500W/3000W
Power supply 170-240V
Temperature sensor 0-990Accuracy of temperature:20
Certifications
CE,ISO9001&3A2000