series of centrifugal pumps
You May Also Be Interested In:
cast iron pump
Flow rate up to 160 1/min
Dynamic head up to 50 m
Suction lift up to 7 m
Fluid temperature up to +60 0
Maximun ambient temperature +40 0
The TCPa series consists of PUMPS with a SINGLE CENTRIFUGAL IMPELLER. These pumps have an essential form and are the result of precise design choices, made to obtain specific performance characteristics. The impeller, mounted on the end of the motor shaft, directly faces the suction opening machined in the pump. The shape of the impeller transmits a radial motion to the fluid from the center outwards, with minimum hydraulic loss. The blades inside the impeller channel transfer energy to the fluid both in the form of pressure and an increase in speed.
After leaving the fluid passes to the volute and tapered diffuser which transform part of the kinetic energy into pressure energy.
PUMP INSTALLATION AND APPLICATIONS
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components.
THE ARE EXTREMELY RELIABLE, SIMPLE TO USE, QUIET AND VIRTUALLY MAINTENANCE-FREE, FINDING MANY USES IN DOMESTIC AND CIVIL APPLICATIONS, AND IN PARTICULAR THE AUTOMATIC DISTRIBUTION OF WATER FROM SOMALILAND MEDIUM-SIZE SURGE TANKS, TRANSFERRING WATER, WATERING GARDENS, ECT.
These pumps should be installed in a covered area, protected against the weather.
The range of pumps making up the TCPa series is particularly varied: however when developing the single units, care was taken to aim at standardizing the following features within the series:
-Ample and stable characteristic curves
-Outputs having good absolute values and tangentially flat curves;
-Flat absorption curves at high delivery rates, preventing motor overloading even during prolonged use;
-Good suction capacities both at low and high delivery rates
Cast iron PUMP BODY
Stainless steel PUMP BODY COVER, in cast iron on more powerful model.
BRASS IMPELLER, centrifugal radial flow type (techno polymer impeller on request)
Ceramic and graphite MECHANICAL SEAL.
MOTOR: the pumps are coupled directly to an asynchronous, high efficiency TOP induction motor of suitable size, which is quiet running, close and externally ventilated, suitable for continuous duty. INSULATION class F (B up to 0.75kw)
The thermal cutout rely (motor protector) is incorporated in single phase motors.
Three phase motors requite an adequate external motor protector, with continuous according to current standards.
PROTECTION IP 44
CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.
WARRANTY: 1YEAR(according to our general sales conditions)