series of submersible pumps
You May Also Be Interested In:
stainless steel motor
Flow rate up to 200 l/min (12m 3 /h)
Dynamic head up to 11m
Maximum operating depth 2m below water level
Maximum fluid temperature+400C
Maximum passage for suspended solids 10mm
Maximum emptying level 9mm form the bottom
The QSA is a single open impeller centrifugal submersible drainage pump designed to function either partly or totally submerged. The impeller, mounted on the end of the drive shaft, consists of a back disk and blades. The fluid enters the rotating blade channel through the suction, where it moves radially from the center outwards, acquiring energy, and the fluid leaves the pump via the side delivery opening in the pump body. Correct motor cooling is ensured by the fluid being pumped.
PUMP INSTALLATION AND APPLICATIONS
QSB is designed to pump clear or slightly dirty water not containing abrasive substances.
IT IS RECOMMENDED FOR SMALL EMPTYING JOBS SUCH AS FLOODED BASEMENTS AND GARAGES, HOLIDAY HOMES, TUBS AND USED DOMESTIC WATER DISPOSAL.
A purposely built pit with minimum dimensions 350 W 350 W 350h mm is recommended for fixed installation, to provide total drainage and allow correct operation of the float switch. This system automatically starts the pump when the fluid reaches a preset level, stopping it once the fluid has been emptied. Installing a suitable non return valve on the delivery pipe prevents reverse flow when the pump stops.
When designing performance level for the QSA pump, special attention was given to typical requirements for domestic usage. Performance curve specially designed for high rates at the low installed power rating.
stainless steel DELIVERY BODY
stainless steel BASE
Technopolymer open impeller
EXTERNAL FLOAT SWITCH for automatic pump operation
Stainless steel MOTOR SHAFT
Carbon/alumina MECHANICAL SEAL.
Sealed induction MOTOR designed for continuous duty.
The thermal cutout relay (motor protector) is incorporated.
INSULATION class B
Neoprene submerged SUPPLY CABLE. Supplied standard with 5 metres of cable and plug (10 meters on request) .
CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.
WARRANTY: 1 YEAR (according to our general sales conditions)