solar water heater -balcony installation
You May Also Be Interested In:
magnetron sputtering coating
solar water heater
1. Heat Water Character
1) Vacuum magnetron sputtering coating, high absorptivity, span life above 25 years.
2) Special medium for heat conduction, high heat conductivity,
3)4050mm thermal insulation filled with fiber glass, good thermal insulation.
4) Modularization installation of collector, effect construction integration. .
5) Laser welding between absorber and copper tubes.
6) Medium adapt to temperature -40~180.
7) Collector peak power: 2.7KWH/m2
8) Anti-ice ball shock: bear front impact of #25mm ice ball.
9) Heat water volume: produce heat water5570-80L/day per square meter collector at forced circulation.
2. Water Tank
-Low heat loss, good thermal insulation effect.
-Heat exchanger is composed of copper heaters.
-Porcelain Enamel and Stainless steel Inner Vessel for Corrosion Resistance protection.
-- Optimization of the diameter and height rate to store water
-- Water tank 3 year warranty, parts and heater movable one-year warranty
-- Fully enclosed design, not subject to water pressure and air pressure fluctuations, particularly applies to low water pressure areas.
-Floor-standing, wall-mounted (vertical) , indoor and outdoor can be installed
3. Pump and Temperature Controller
-Fully automatic temperature controller, adjust water temperature 50-85, automatic constant temperature.
-Multi safe security function
-Automatic power cutting protect at high temperature
-Temperature safe valve protection
-Pressure safe valve protection
-Fully automatic temperature protection
-Anti-back flow protection
Dimension LxWxH (mm)
Gross Area (m2 )
Aperture Area (m2 )
Absorber Area (m2 )
Number of covers
Low iron, tempered glass
Header tuber size
18 or 22mm*Thickness 0.8mm
Riser tuber size
8mm* Thickness 0.75mm
1.2Mpa, keeps 5 minutes
silver or black
Aluminum plate or over shell
Max Operation Temperature