name:smd splice tape
1) 8mm, 500pcs/box, for panasonic CM 402 machine
2) Equipped with ProLINE-Roadrunner enable feeder with sensor record when and what kind of component tape are loaded
3) Matt black tape is a necessity for realizing....
names:smt splice tape, smd splice tape, splice tape
1) Colors: yellow, black
2) Available for 8mm 12mm 16mm 24mm carrier tapes
3) Additional strip strengthen connected tape, which will not be broken off under
Advantage And Specialty: New Product Base paper design wider, peel off easily . Operate freely, splice nicety.
1. Increasing efficiency of work , if stop machine , you need about two minutes to complete the splice , machi....
1. Place the material tape on cut tool. Cut along the center of
2. Place the splice rivet go to the pole of splice tool
3. Press the material tape on pole of splice
4. Refer to step 3 , place the other material tape on s....
good film splicing tape at low price, we can provide you at any quantity, and these items have been used by many customer from foreign and domestic market.
19mm x66mm x0.06 USD1.30
25mm x 66mm x0.06 USD1.35
19mm x 66mm x 0.08 USD2.00
SMT Splicing tapes(single/double/roll type) create solutions for joining all kinds of tapes and help you make full use of components in the carrier tapes, reducing the machines and feeder abrasion.
Besides, it is easily used and improves productivi....
New product Thinner design , through machine easily , operate freely, splice nicety.
1. For some special material tape , adopt standard splice tape to stickup . when the machine through the tape may block , ....
We supply customers polyimide tape, polyester tape, glass cloth tape etc. , all of which are coated by silicone adhesive. And also we provide polyimide film without adhesive. All of these tapes can be supplied with fluoride release liner.
We are ....
1. Cut material tape along the center of hole .
2. Peel off cover paper by broken line.
3. Stick up AI splice tape according to fixed hole .
4. Peel off the other half cover paper.
5. Stick AI material tape , make the leav....