You May Also Be Interested In:
Owing to a good design, the pin tooth is more flexible and easier to touch the whole pulley. It does not need too much energy when the belt goes around the pulley and is good at the engine operation . If used for a small pulley, it is good at increasing running speed and at the engine operation. Incomparison to the traditional belt, the pin belt is 70% higher in the loading capacity, especially in the high driving and on a small pulley. The shorter belt a driving unit has , the lower it costs. An impact driving assembly can get less belts and pulleys, you certainly see lower weight, space and cost. Because of no need of frequent change, it sees a low maintenance and stopping.