Sell valve

valve You May Also Be Interested In: actuated valves fly ash top end valve water gas
Special Features

Integrally moulded elastomer liner restricts dislocation of seat and ensures longer life.

Flat surface on the disc and the liner at the top and bottom ensures perfect sealing between body, disc and stem.

Elastomer body liner is extended deep into the top and bottom of disc shaft passages with integral 'O' ring to ensure no working media contacts the body material, thus ensures longer life for body.

A primary seal provided at the top end of the body prevents entry of any foreign particles in the Valve, thus ensures longer life for Stem and smooth operation.

Valve disc is designed to ensure smooth straight through flow, which reduces pressure drop across the Valve.

Close tolerance maintained between the liner, disc and stem reduces operation torque and ensures smooth and easy operation.

Integrally moulded liner got integral gasket with it at both ends of the Valve which eliminates requirement of Valve mounting gaskets.

Designed and manufactured to conform BS 5155/API 609

Suitable to mount between flanges of ANSI B16.5 [150#] or BS-10 Table D/E

Pneumatic and Electrical actuated Valves are available on demand.

Top platform of the Valve is suitable to mount actuator or manual gearbox directly.

Flow Control Lever is provided to facilitate fine control of flow.

Matrial of Construction & Presure Temperature Rating
Service Body Material Disc. Material Sleeve Max. Working Pressure Max. Working Temp.
Liquids, Air, Water, Gas, Slurry, Powder, Fly Ash, Sea Water. C. I. , S. G Iron C. I. , S. G Iron, Nitrile ** 16 bar 900C
CS, CF-8, CF-8M CF-8, CF-8M
Steam, Hot Water, Gas, Powder, Slurry of abrasive nature. -do- -do- EPDM** 14 bar 1200C

Test Pressure
Rating Body Seat
PN 10 16 bar 10 bar
Pn 16 24 bar 16 bar